The PEAK Riser

The Riser is for those tyers that would like to adjust the height of their vise using either a Pedestal Base or the PEAK clamp.

The all brass body allows the adjustment you need when the table or chair height does not match your needs.

A brass tipped set screw, using the same 1/8" allen wrench used on the PEAK pedestal base and Clamp, is used to securely clamp any standard 3/8" riser while the lower portion can be clamped in your standard 3/8" hole in a pedestal base.

This is a great accessory when you do not get to choose the table height at your hotel or on river tying site.

The picture on the left shows the riser on the PEAK Clamp with the optional Accessory Shaft in the second Clamp hole.

With a retail price of only $26.95, the Riser, RSR-1, will give you the adjustment you need when the table height is lower than expected.

The PEAK Clamp

The clamp will allow you to attach your PEAK Rotary Vise or any other vise with a standard 3/8" diameter riser to your tying bench.

This clamp works on table tops from 11/16" up to 2-1/4" thick.

The lower jaw can be removed, flipped over and reassembled if you table top is very thin.

Our nice wide 1-1/2" format will give your vise a sturdy mount on the road or at home.

A second hole has been added to allow you to use an Accessory Shaft (see Accessories page).

At only 12 ounces, the PEAK Clamp will make your vise a welcome traveling companion and with a retail price of $39.95 you can get the CMP-1 to complement your pedestal base.

 

The Brass Screw Upgrade Kit

The standard black nylon screws of the PEAK Rotary Vise can be replaced using the brass screw upgrade kit.

The 1/4-20 thumb screw used to set the tension on the rotary motion has a nylon tip so that the stainless steel rotary shaft is not scarred.

The kit also includes a  8-32 thumb screws for the bobbin assembly.

The Brass Screw Kit, BRS-1, retails for $7.95.

 D-Arm

The D-Arm is a handy rotary handle that can be added to any standard rotary fly tying vise with a 1/4" diameter handle.

A 5/32" allen wrench is included to allow you to position the D-Arm at the desired height and secure it to the existing handle.

The photo to the right shows the D-Arm attached to the PEAK Rotary Vise handle.

A happy customer, Sid D., brought this great idea to our attention so his name will be forever attached to this handy device.

The D-Arm, Arm-D, retails for $8.95.

See your local dealer for these upgrades and other fine PEAK Accessories.