PEAK Vise Options

PEAK Vise Options

PEAK Pedestal Base (BAS-1)

Most stable, well thought out Pedestal Base you'll find! Oversize
6" x 6" footprint combined with the weight of steel supported on
non-skid non-marking feet will keep your vise where you put it.
White powder coat finish is durable, easy to clean, and provides a
great backdrop to see hooks and materials. Integral hook/bead
pocket has rounded corners for ease of retrieval. Also includes our
Accessory Shaft mounting hole. Fits any vise with a 3/8" shaft.

*Lifetime warranty against defects in material or workmanship*

PEAK C-Clamp (CMP-1)

Like all PEAK Fishing products, rigorously engineered for
maximum performance and durability. The lower jaw can be
flipped for clamping on surfaces from 11/16" to 2-1/4". Now you
can mount your vise on anything from a banquet table to a picnic
table. The clamping jaws ride on 2 precision guide pins, the jaw
faces are held parallel. Unlike a typical clamp screw, there is no
rotating clamp pad causing your vise to "walk" as it's clamped to
the table or marring the finish. The rabbeted face engages the edge
of your table so your vise won't rock. As one reviewer stated "You
could press bearings with this clamp." Works with any 3/8" shaft
and the Clamp will also accept our Accessory Post.

*Lifetime warranty against defects in material or workmanship*

PEAK Midge Jaws (MDG-*)

PEAK Saltwater Jaws are available for both the PEAK Rotary Vise
undergo the same hardening and tempering process as our highly
acclaimed standard jaw. The jaws will accept hook wire diameters
from approximately .040" to .075". The black oxide finish reduces
glare in the immediate area of your fly.

*Lifetime warranty against defects in material or workmanship*

PEAK Midge Jaws are available for both the PEAK Rotary Vise
(MDG-1) and the PEAK non-Rotary Vise (MDG-NR). These jaws
undergo the same hardening and tempering process as our highly
acclaimed standard jaw. Our midge jaws are specifically profiled
to allow more access to tie on smaller hooks. Not recommended
for extended use with hook wires larger than a #16 dry fly hook.
Black oxide finish reduces glare in the immediate area of your
hook.

*Lifetime warranty against defects in material or workmanship*

PEAK Riser (RSR-1)

The PEAK Riser will work with our Pedestal Base or C-Clamp (in
fact it is compatible with any base or clamp that fits a 3/8"
diameter vise shaft) and will accept any vise using a 3/8" diameter
shaft. The Riser allows you 1-3/4" additional height adjustment.
Leaving the riser attached to your vise and disassembling it from
transportation.

*Lifetime warranty against defects in material or workmanship*

PEAK D-Arm (Arm-D)

If you prefer a horizontal handle to a vertical handle, PEAK's
D-Arm may be just the accessory you need. Easily assembled with
the included tool, this rotating handle will "turbo-charge" your
tying. The freely rotating shaft allows you to rotate your vise
without having the handle spin in your fingers.

*Lifetime warranty against defects in material or workmanship*

PEAK's Material Clip is provided with 2 sizes of spring to grip a
wider range of materials better. PEAK's straight spring design
works better than a conventional wrapped spring, which results in
the spring coils forming an inverted "V". PEAK's straight spring
leaves parallel coils which will hold your materials more securely.
The PEAK Material Clip will fit any 1/4" Diameter shaft. Clips
will rotate to any angle needed or completely out of the way and
multiple Material Clips can be used in tandem.

*Lifetime warranty against defects in material or workmanship*

Vise Bling! We may as well be honest, these screws won't affect
your vise's performance. They are an option that really does dress
up your vise though, in fact they are one of our most popular
options.

*Lifetime warranty against defects in material or workmanship*

PEAK Brass Screw Kit (BRS-1)

PRV Vise with Brass Screw Kit Installed

PEAK Vise travel Pouch (PCH-1)

Yes, this pouch is sewn in the USA, right here in Colorado, like all
Cordura for years of use. The 2 padded interior compartments
separate and protect your vise and accessories. It will hold any of
PEAK's vises with the Pedestal Base or the C-Clamp. (Vise,
Pedestal Base, and Bobbin Cradle Assembly shown are not
included with pouch)

*Lifetime warranty against defects in material or workmanship*

The PEAK Bobbin Rest Assembly is fast and easy to adjust and
fits any vise with a 3/8" diameter shaft.

*Lifetime warranty against defects in material or workmanship*

PEAK Material Clip (CLP-M)

PEAK Bobbin Rest Assembly (BOB-1)

PEAK Fishing
599 West 71st Street
Loveland, CO 80538
970-622-9601 (ph)
970-622-9602 (fax)

info@peakfishing.com

last updated 01/04/2012

PEAK Saltwater Jaws (SLT-*)

PEAK’s Tube Fly Vise Head is also available separately for PEAK
vise owners who do not want to buy a second complete vise. It is
easily changed out. The head comes with the same two pins (1/32”
and 1/16”) as the complete Rotary Tube Fly Vise and a 5/64” hex
key (the only tool required to change out the heads).
(Not compatible with PEAK’s non-Rotary Vise, #PNRV)

Pictured fly not included
*Lifetime warranty against defects in material or workmanship*

PEAK Tube Fly Vise Head (PTFV-HD)

***NEW***
PEAK offers a full range of custom ground tapered shoulder tube
fly pins available individually for use with PEAK's Tube Fly Vise as
well as other vises or adapters that accept round pins.

PTFP-031 Tube Fly Pin 1/32”
PTFP-047 Tube Fly Pin 3/64”
PTFP-062 Tube Fly Pin 1/16”
PTFP-078 Tube Fly Pin 5/64”
PTFP-093 Tube Fly Pin 3/32”

Pictured fly not included
*Lifetime warranty against defects in material or workmanship*

PEAK Tube Fly Pins (PTFP-*)