The Pedestal Base is a white powder coated steel plate 6" x 6" x 1/2".

This ROCK STEADY pedestal base will NOT tip or move no matter how big the fly!

Rubber feet keep this massive base right where you put it.

A pocket with rounded corners allows easy retrieval of hooks, beads, supplies without getting them stuck.

A second hole has been added to allow the tyer to add an Accessory Shaft to get those items like a lamp or back ground plate off the main vise riser shaft.

The picture to the lower left shows the Pedestal Base with the Riser Accessory and the Accessory Shaft in use.

A brass tipped set screw and Allen wrench will allow any standard 3/8" vice riser to become pedestal mounted.

This is a great replacement if you already have a vise with one of those wimpy little cast bases that tip and slide around your tying table.

The PEAK Pedestal Base is part number BAS-1 and has an MSRP of $39.95 and includes the Allen wrench and two set screws (one for each hole) included.

See your local dealer for these and other fine PEAK Accessories.