PEAK Fishing New Products

New Products!

PEAK Fishing
599 West 71st Street
Loveland, CO 80538
970-622-9601 (ph)
970-622-9602 (fax)

info@peakfishing.com

last updated 01/04/2012

***New From PEAK Fishing!***

***NEW***
Same concept as our standard Hex Stacker, but built magnum size
to handle large bundles of hair for spinning and longer hairs such
as buck tail. The opening at the top is 1.13 inches in diameter and
the cavity for the hair is 3-9/16 inches deep. The base also works
well for holding multiple colors of hair while stirring to blend
them. PEAK's standard Hex Stacker shown in the background for
scale.

Special thanks to Pro-Team tyer Pat Cohen for the Punk Rocker
pattern used in the photo, fly not included
*Lifetime warranty against defects in material or workmanship*

PEAK Magnum Hex Stacker (HEX-M)

***NEW***
Handy accessory for any tying bench or travel kit. Organize your
hooks, beads or other materials you don’t want floating around your
tying area. Full rounded bottom makes removing items easy,
lightweight with a table friendly cork pad bottom. Rabbetted bottom
so cups stack neatly and stay stacked out of the way when not in use.

*Lifetime warranty against defects in material or workmanship*

PEAK Hook/Bead Cup (HCUP)

***NEW***
Built with the same quality materials used in PEAK’s original Rotary Vise.
PEAK’s Rotary Tube Fly Vise uses a chuck with no collets that require
changeout, maximizing convenience and minimizing set-up time. The chuck will
accept pins and metal tubes up to 1/8” in diameter. The custom ground pins
have a shallow sloped shoulder for capturing the tubing. No additional pieces are
needed, simply push the tubing up the shoulder until it is held snugly. The vise
comes with two pins, 1/32” and 1/16”, other sizes are available separately.
Available with PEAK’s Pedestal Base or our C-Clamp (not shown), either option
provides the most stable mounting platform available and makes this vise
compatible with PEAK’s unique accessories. Also provided with a bobbin cradle
assembly for full rotary tying capability.

*Lifetime warranty against defects in material or workmanship*

PEAK Tube Fly Vise
Pedestal Base Model (PTFV-G2)
C-Clamp Model (PTFV-C1)
C-Clamp model available but not shown

Use with PEAK's custom
ground tapered pins

Holds metal tubes up to 1/8"
diameter with no adapter

***NEW***
PEAK’s Tube Fly Vise Head is also available separately for PEAK
interchangeable with the head of our standard rotary vise and
easily changed out. The head comes with the same two pins (1/32”
and 1/16”) as the complete Rotary Tube Fly Vise and a 5/64” hex
key (the only tool required to change out the heads).
(Not compatible with PEAK’s non-Rotary Vise, #PNRV)

Pictured fly not included
*Lifetime warranty against defects in material or workmanship*

PEAK Tube Fly Vise Head (PTFV-HD)

***NEW***
PEAK offers a full range of custom ground tapered shoulder tube
fly pins available individually for use with PEAK's Tube Fly Vise as
well as other vises or adapters that accept round pins.

PTFP-031 Tube Fly Pin 1/32”
PTFP-047 Tube Fly Pin 3/64”
PTFP-062 Tube Fly Pin 1/16”
PTFP-078 Tube Fly Pin 5/64”
PTFP-093 Tube Fly Pin 3/32”

Pictured fly not included
*Lifetime warranty against defects in material or workmanship*