LIRS Product Family
Property of PEAK Engineering and Automation DBA PEAK Fishing Copyright 2009 - 2017 All Rights Reserved
PEAK's Large Iron Retention System (LIRS) is
aimed at solving the problems faced when trying to
tie on hooks with large wire diameters and long
shanks, which often requires the use of heavy threads
having high breaking strength. Materials (including
Stainless Steel, Brass, Tool Steel, and Aircraft
Aluminum) are chosen to last for a lifetime of tying.

PEAK's Jurrasic Series (JS products) is designed for
the most demanding applications and has a larger
riser shaft (1/2"), and rotary shaft (3/8") than the
PRV series. The JS1 hardened and tempered tool
steel anvil/drawbar combination accepts hook wires
up to .195" in diameter.  All adjustments are
designed to be accomplished with minimal effort. The
rotation resistance adjustment screw provides infinite
adjustment and is easily manipulated. The JS series
also incorporates a locking thumbscrew that will
positively lock the head orientation in 1 of 4
positions when desired.

The large stable pedestal base (JSBAS model)
included with the JS1-G2 will hold this tool where
you set it, and the non-marking feet protect the
surface you set it on. For additional stability, the
base also comes with two mounting holes that will
accept up to 5/16 inch fasteners to mount the base to
your tying bench. The steel base is powder coated
white for a surface that will last and provides a
backdrop you can see your materials against. The
base also includes an integrated hook/bead pocket
with rounded edges for ease of removal, and our 3/8"
accessory shaft mounting holes
(accessory shaft not
included)
.  The JSBAS base is designed to
accommodate the 1/2" vise riser shaft of the JS series
products, which is locked in place with a large
comfort-grip hand knob.

(Pictured fly not included)

The JS1-C1 is equipped with PEAK's JSCMP
C-Clamp. Like the JSBAS, the JSCMP is powder
coated steel and designed for the 1/2" vise riser shaft
of PEAK's JS series products and also allows for the
use of PEAK's 3/8" accessory shaft. Just like PEAK's
PRV product series C-Clamp, the CMP-1, the JSCMP
has rabbetted jaws that can be reversed for maximum
table thickness adjustment. The jaws ride on parallel
guide rods and do not rotate when adjusted so they
won't mark your table or "walk" when you tighten the
clamp. Wrench for tightening clamp is included, vise
riser is locked in place with a large comfort-grip hand
knob.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PEAK LIRS #1 (w/Pedestal Base) JS1-G2
PEAK LIRS #1 (w/C-Clamp) JS1-C1
PEAK's Large Iron Retention System (LIRS) is
aimed at solving the problems faced when trying to
tie on hooks with large wire diameters and long
shanks, which often requires the use of heavy threads
having high breaking strength. Materials (including
Stainless Steel, Brass, Tool Steel, and Aircraft
Aluminum) are chosen to last for a lifetime of tying.

PEAK's Jurrasic Series (JS products) is designed for
the most demanding applications and has a larger
riser shaft (1/2"), and rotary shaft (3/8") than the
PRV series. The JS1 hardened and tempered tool
steel anvil/drawbar combination accepts hook wires
up to .134" in diameter.  All adjustments are
designed to be accomplished with minimal effort. The
rotation resistance adjustment screw provides infinite
adjustment and is easily manipulated. The JS series
also incorporates a locking thumbscrew that will
positively lock the head orientation in 1 of 4
positions when desired.

The large stable pedestal base (JSBAS model)
included with the JS2-G2 will hold this tool where
you set it, and the non-marking feet protect the
surface you set it on. For additional stability, the
base also comes with two mounting holes that will
accept up to 5/16 inch fasteners to mount the base to
your tying bench. The steel base is powder coated
white for a surface that will last and provides a
backdrop you can see your materials against. The
base also includes an integrated hook/bead pocket
with rounded edges for ease of removal, and our 3/8"
accessory shaft mounting holes
(accessory shaft not
included)
.  The JSBAS base is designed to
accommodate the 1/2" vise riser shaft of the JS series
products, which is locked in place with a large
comfort-grip hand knob.

(Pictured fly not included)

The JS2-C1 is equipped with PEAK's JSCMP
C-Clamp. Like the JSBAS, the JSCMP is powder
coated steel and designed for the 1/2" vise riser shaft
of PEAK's JS series products and also allows for the
use of PEAK's 3/8" accessory shaft. Just like PEAK's
PRV product series C-Clamp, the CMP-1, the JSCMP
has rabbetted jaws that can be reversed for maximum
table thickness adjustment. The jaws ride on parallel
guide rods and do not rotate when adjusted so they
won't mark your table or "walk" when you tighten the
clamp. Wrench for tightening clamp is included, vise
riser is locked in place with a large comfort-grip hand
knob.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PEAK LIRS #2 (w/Pedestal Base) JS2-G2
PEAK LIRS #2 (w/C-Clamp) JS2-C1
JS1-HD
PEAK offers replacement heads that allow you to
convert your JS1 product to a JS2 product (if you
own a JS1, you can purchase the JS2-HD and swap
those heads in and out) or your JS2 product to a JS1
product (if you own a JS2, you can purchase the
JS1-HD and swap those heads in and out). This
allows you to increase the range of hook sizes you
can tie on without buying a complete new vise. All
the tools required to accomplish the change-out are
included with the interchangeable head.

Note:  JS series heads are not compatible with
PEAK's PRV series products.

*Limited lifetime warranty against defects in material or
workmanship*
JS2-HD
PEAK LIRS #3 (w/Pedestal Base) PRVLIRS-G2
PEAK LIRS #3 (w/C-Clamp) PRVLIRS-C1
PEAK's Large Iron Retention System (LIRS) is
aimed at solving the problems faced when trying to
tie on hooks with large wire diameters and long
shanks, which often requires the use of heavy threads
having high breaking strength. Materials (including
Stainless Steel, Brass, Tool Steel, and Aircraft
Aluminum) are chosen to last for a lifetime of tying.

The PRVLIRS hardened and tempered tool steel
anvil/drawbar combination accepts hook wires up to
.095" in diameter.  All adjustments are designed to
be accomplished with minimal effort. The rotation
resistance adjustment screw provides infinite
adjustment and is easily manipulated.

The large stable pedestal base (BAS-1 model)
included with the PRVLIRS-G2 will hold this tool
where you set it, and the non-marking feet protect
the surface you set it on. The steel base is powder
coated white for a surface that will last and provides
a backdrop you can see your materials against. The
base also includes an integrated hook/bead pocket
with rounded edges for ease of removal, and our 3/8"
accessory shaft mounting holes
(accessory shaft not
included)
.  The BAS-1 base is designed to
accommodate the 3/8" vise riser shaft of the PRV
series products.

(Pictured fly not included)

The PRVLIRS-C1 is equipped with PEAK's CMP-1
C-Clamp. Like the BAS-1, the CMP-1 is designed for
the 3/8" vise riser shaft of PEAK's PRV series products
and also allows for the use of PEAK's 3/8" accessory
shaft. The CMP-1 C-Clamp has rabbetted jaws that
can be reversed for maximum table thickness
adjustment. The jaws ride on parallel guide rods and
do not rotate when adjusted so they won't mark your
table or "walk" when you tighten the clamp. Wrench
for brass tipped set screw used to lock the vise riser
shaft in place is included.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PRVLIRS-HD
PEAK offers the PRVLIRS-HD replacement head to
allow you to convert your PRV product to a
PRVLIRS. This allows you additional hook holding
flexibility without buying a complete new vise. All the
tools required to accomplish the change-out are
included with the interchangeable head.

Note:  PRV series heads are not compatible with
PEAK's JS series products.

(Pictured fly not included)

*Limited lifetime warranty against defects in material or
workmanship*
PEAK Fishing
599 West 71st Street
Loveland, CO  80538
970-622-9601 (ph)
970-622-9602 (fax)

info@peakfishing.com

last updated 02/14/2017