Accessories
Rotary Tying Techniques DVD
This DVD features the tying talents of Al Ritt as he shows you great ways to
use your PEAK Rotary Vise as a TRUE ROTARY VISE.
This DVD is perfect for the beginner to intermediate fly tyer who would like to
know more about rotary tying and how to best accomplish these techniques on the
PEAK Rotary Vise.
The DVD is part number DVD-1 and has a MSRP of $19.95 and is ready to ship
today.
Profile Plate & Waste Catcher
Picture above are our new Waste Catcher and Profile Plate. These are two
separate accessories that show up in the picture on the same vise.
The PEAK Profile Plate provides a perfect back ground for your fly while tying.
The neutral color will provide a crisp view of your fly with no back ground
clutter.
The mount for the Profile Plate fits all 3/8" diameter vise risers or the PEAK
Accessory Shaft. The part number is PRF-1, retails for $24.95 and is ready
to ship today.
The PEAK Waste Catcher has our own unique round shape and white rip stop nylon
material for the same great contrast our white base gives you.
The mount snaps onto any standard 3/8" diameter vise riser shaft or the PEAK
Accessory shaft.
Our Waste Catcher can be easily pulled off of the mounting bracket and emptied
without having to remove other accessories.
The Waste Catcher is part number WST-1, retails for $24.95 and is ready to ship
today.
Desktop Tool Caddy
 
Pictured above is the Desktop Tool Caddy with Tools. This accessory can be
ordered with tools (DSK-T) as shown or without tools (DSK-C).
The PEAK Desktop Tool Caddy keeps your tools handy while you are at your
bench as well as on the road.
Multiple holes in the molded base allow a pair of scissors, a bobbin
holder, whip finisher, hackle pliers, bobbin threader, our own Hex
Stacker and Ritt Pick-N-Brush to stand up ready for use.
There are three extra holes for your additional tools.
A translucent lid, shown on the right, confines your tools for travel
while it lets you see that your tools are in the caddy.
Tools sold with the Desktop Tool Caddy are high quality tools
manufactured at PEAK (Ritt Pick-N-Brush & Hex Stacker) and by Dr. Slick.
The Desktop Tool Caddy with tools (tools listed and pictured above) is part number
DSK-T, retails for $64.95 and is ready to ship
today.
The Desktop Tool Caddy without tools is
part number DSK-C, retails for $15.95 and is ready to ship today.
Vise Travel Pouch
Our Travel Pouch is designed to hold your PEAK Rotary Vise securely when
traveling.
The base or c-clamp can be slid into a padded interior pocket and the vise and
accessories can be zipped into the pouch as shown above.
The green nylon exterior will stand up for years of travel and the padding will
keep the vise looking like new.
The Travel Pouch is part number PCH-1 and has a MSRP of $24.95 and is ready to ship
today.
Material Clip
The PEAK Material clip has a unique horizontal design that SECURELY traps
materials without damage.
This clip attaches to any standard 1/4" diameter
shaft like the one found on the PEAK Rotary Vise.
Multiple clips can be
used at one time for those complicated Atlantic salmon flies.
Two springs
are included with each material clip to cover a wide range of materials.
The material clip is part number CLP-M and has a MSRP of $9.95.
Hex Stacker
The PEAK Hex
Stacker has a hexagonal body AND base.
Some hair stackers come with a hex body
or cap but not both.
This design idea allows the stacker to be right where you
put it down on your bench without worry of it rolling off the table.
The
aluminum body is light, easy to use and is a non-static design.
Part number HEX-1 and has an MSRP of
$13.95.
Accessory Shafts
The PEAK Accessory Shafts are precision 3/8"
diameter ground stainless steel shafts.
These accessories allow the tyer to take items like
lights, magnafiers, hackle gages, back ground plates, etc. off the main
vise stem but keeps them close for continual use.
Compatible with the Pedestal Base or the PEAK
Clamp.
-S is the shorter version at 3" long and works best
if no riser is used on the vise.
-L is the longer version at 4-3/8" long and works
great in conjunction with the Riser.
The part number is SFT-S and the MSRP is $7.95 and
the SFT-L for $8.95.
Light and Magnifier
The PEAK vise seen to the left has the Daylight Fly
Ty Lamp and the Daylight Magnifier as well as other accessories.
The Fly Ty Lamp has a flexible 16" neck, cold cathode tube bulb and can
clamp directly onto a 3/8" diameter vise stem or onto the PEAK Accessory
shaft as shown. It also comes with a table clamp if you want to
clamp to a table. This lamp provides bright, color corrected light
to simulate real sunlight.
The Magnifier has a main lens diameter of 3.5
inches with a 2.25X magnification. An inset 3/4 inch lens provides
a 4X magnification. It also comes with a clamp that will fit
directly on a 3/8" vise stem or accessory shaft.
The Fly Ty Lamp U36004 is $74.99.
The Magnifier U91164 is $29.99.
Desktop light and magnifier
The Daylight Desktop Lamp and the magnifier come
together as shown to the left. The lamp has a long flexible neck
with a 18W (100W equivalent) Daylight Tube which provides bright, color corrected light
to simulate real sunlight.
The Magnifier has a main lens diameter of 3.5
inches with a 2.25X magnification. An inset 3/4 inch lens provides
a 4X magnification.
The Desktop Lamp and magnifier U23020 is $89.99.
See your local dealer for these and other fine PEAK Accessories.
|
